Part 17 – Running a Recovery

Finally, we have arrived to a point where we can run the Recovery. SRM migrates all the VMs in the recovery plan to the recovery site. SRM attempts to shutdown the VMs at the Protected Site. Not everyone in the organization are allowed to run recovery as it alters the entire environment in many cases and reversing things is time consuming and needs effort.

To run the Recovery, click on the Red play button on the quick menu.


Check the box to agree that you know what you are doing.


Review the settings and click Finish.


As we saw in the Test, expect some timeout and errors because of no VMware Tools on.the virtual machines in my lab environment.


Hope you had fun reading the SRM series. Thanks!

Part 1 – Introduction to SRM 6.1

Part 2 – SRM 6.1 Home Lab Setup

Part 3 – Installing SRM 6

Part 4 – Installing HP Virtual Store VSA on ESXi – Step By Step

Part 4 – Installing HP VSA on VMware Worstation – Step By Step

Part 5 – Install HP CMC for VSA – Step by Step

Part 6 – Creating Management Groups, Volumes and Presenting them to ESXi – HP VSA

Part 7 – Scheduling Array Based Replication – HP VSA

Part 8 – Pairing Sites and Installing HP-SRA on SRM 6

Part 9 – Configure and Rescan SRM Array Managers

Part 10 – Understanding Inventory Mappings and Other Terms.

Part 11 – Configure Inventory Mappings

Part 12 – Creating Protection Group

Part 13 – Creating a Recovery Plan

Part 14 – Configuring a Recovery Plan

Part 15 – Test a Recovery Plan

Part 16 – Cleanup after testing a Recovery Plan

Part 17 – Running a Recovery


#run-recovery, #srm-6-1